Stand alone alarm horn
Break glass sensor
Reqiured relay
Alarm harness that plugs into main harness
Bonnet latch with micro switch
Genuine factory Central locking & alarm fob
Broken glass sensor
I've now got factory central locking and factory alarm set up in the 850R
242GT Thanks for the pictures, I've pretty much got all of them parts and installed the horn and bonnet latch/switch last night.
With regards to the glass break sensor, where does this connector plug into:
The only item i need to buy is the keyless entry fob, i looked on Skandix and thought their Black Friday Sale might have offered a discount but it looks like they only have a sale on caps, bottle openers and the like :-/ https://www.skandix.de/en/spare-parts/body/bootlid-bonnet-doors-sunroof/locking-system/remote-control-locking-system/1019759/?srsltid=AfmBOoqqbEAPZp8Gen3pKXZRB2EKc1vnRNAJQ4R1wHcK-k0YTqH7Bhue
Any tips on programming the fobs? I'm assuming i just buy the fob and then program it as per usual with the 5 key cycles?
Also, dos your indicators flash when you lock the car?
It looks like your horn is mounted in a different location? I also noticed your running the v70 style wipers which means you can use the nut caps that lot of people seem to ask about online.
I've deliberately didnt mounted the horn in the factory spot , which is down on the firewall near the turbo as it would be subject to the heat coming off the turbo , its also far more practical where its mounted now for the harness plug and function , sound .
The harness plug was literally right next to where I mounted it , I found a hole that is already in the metal lip that runs accross the top of the engine bay, just run your finger along the lip under the plastic cover and use a step drill to carefully drill a hole in the plastic making sure not to touch the painted lip below , its under the plastic cover in the middle in front of the screen and covers the cabin filter which I've also installed as 850's didn't come with them.
Yes , I've converted the wipers to the S/C/V70 series wipers and now have drivers side (right hand) working perfectly in any rain event.
The caps are hideously expensive for genuine from suppliers ( $24 plus postage) so I've used a different manufacturers cap with an O ring inside to create a tight fit so it functional and looks original.
Yes , all blinkers flash as per factory with the fob , the smaller rectangle button operates the alarm , Stu from Voldat helped out with the setting up , I bought parts from overseas and Stu to complete the reqiured parts and install.
The good part is that on the 850 , the wiring harness is all plug and play ready to go , so as you get the parts , wiring up is very easy via ready to go plugs in the harness.
I'm a fussy old fossil , so now everything works in the cars entertainment as it should including the CD player , both stacker in boot & single player in dash.
I use a blue tooth cassette to connect my phone to the cars speaker system so I can use google maps and Waze as a good sat nav.
This has allowed me to keep the 850R as per factory original as possible both inside and outside the car
Ah I see. Looks tidy 
why do people upgrade to the v70 wiper arms out of curiosity?
I know of some at a local wreckers and also have caps in my shed.
Keen to see where that glass break sensor plug goes into
morch_66479 the standard 850 wiper dosn't like the Australian heat and as they get older twist out of shape and don't wipe the screen with full contact on the drivers side to the point its dangerous in storms trying to see and pass rego checks.
The factory wiring diagram will show where to plug and play the alarm.
242GT
This makes sense and maybe this is why my passenger arm is nearly touching the bonnet. Maybe i should upgrade to the V70 arms.
I tried looking at the diagram but still none the wiser. I understand the green plug goes into the relay but the 2 pin plug might make more sense when I go to install.
I was chatting to you on Messenger about your spare amp, I've since managed to get my hands on one: 1384848 - 4x50w.
My GROM system has allowed for Bluetooth connectivity and is also able to connect my old iPod to the radio too.
Soon i should have the audio, alarm system & headlight wiper conversion completed - as you've already mentioned its super handy having all the wiring tee ready to plug and play 
I'm in two minds on the washer wipers on the headlights . When I had the car respray I had both sets painted , I like the look with them but prefer the smooth look without . One of the motors needs a rebuild so I've stuck to without .
Bit of a late reply to the headlights wipers lol
As far as I know there's a couple of different types , my car had an Australian after market central locking module unit plugged into the harness behind the glove box , but ever since I had the car it kept flattening the fob batteries within 24-48hrs and had very poor range, about 2 metres
Hit n miss with my fob , sometimes around 6 metres sometimes 2 metres , Volvo's 
Very pleased with the end result of the genuine parts I installed, took a while to collect all the bits a pieces but tested all the sensors and the all work.
Factory brochure of another volvo factory security system
Not sure, I think I sold it on here but will have a look 
Found it
Luckily still in the keys boul lol
LMK if you want it
rado likewise… closer to the receiver behind the glovebox the better.
I recently had trouble programming my 2nd fob but finally found out the issue was I needed to rpgram both at same time
rado I had an issue with one of my motors. Wouldn't move so had to pull apart and shave a little off a plastic part inside. Works a treat now.
Here's my kit ready for install:
AUDIO Continued:
Dynaudio speakers pulled from the rear of a C70, basically a plug and play set after i swapped over the terminals to the old housing as the connectors are different.
Ps: Managed to get the 4x40 Volvo amplifier which is on the way from Ireland as we speak.
RANDOM ITEMS:
I noticed my front left indicator lens is from 1999 so i got another from 1995 to match the right side!!
I removed the agricultural exhaust tip clamps and fitted some black stainless steel ones, surely this will give me an extra 1HP? 
More goodies arrived from GCP - I made use of the Black Friday Sales:
New dipstick arrived as old handle had cracked, o-rings had failed.
New fuel pump relay and correctly located - old one had cracked bracket.
New firewall clips, some variants went NLA between putting in my basket and hitting the order button :-/
New T-5R badge as old one had damage to the finish.
TAKE ME HOME Lights
From reading online, it turns out that if you install a later style relay from the 70 series Volvo's it gives us 850 owners access to the 'take me home feature'. Once the car is turned off and keys removed form the ignition we just simply need to flash the high beams and then the low beam will be activated for approx 30s.
Nice feature to have, simple plug and play.
Original relay is green, new relay is grey:
I can't remember the last time I drove inthe dark but I do like the idea of that option so I've just bought that relay
