shadycourgette

Cheers Steve, I’m NOR just near Whiteman Park.

I’ll get some 5mm and give that a try. I was going to attempt the PCV myself but it’s a big job, might give Andy at Polestar Technic a go. I’ve been incredibly disappointed with Perth Swedish and FOG.

Whiteman Park isn't too far away for you , I'd give him a go . He's only just started but worth it . I'd like to see his business grow as he's got a good attitude and won't fob you off ?

Nice, I think I know of five T-5Rs now, including two others on here I believe. Welcome to the forums!

Five in Australia, and two or three belonging to Oz Volvo members, one being @Jamest5r_ and I forget who has the others.

There's a black sedan that lives near Ballarat, I work on it occasionally.

Theres a yellow T-5R wagon here that I know of, I think Tristan’s sedan went east when he sold it.

I think mine was from QLD originally. Would be good to find out it’s history - a mechanic here refuses to work on it as they thought it was ‘heavily modified’ once upon a time. I do know it was crashed pretty bad, had some severe wheel rub on one side and it turned out the K frame was bent.

  • rado replied to this.
    shadycourgette

    Theres a yellow T-5R wagon here that I know of, I think Tristan’s sedan went east when he sold it.

    I think mine was from QLD originally. Would be good to find out it’s history - a mechanic here refuses to work on it as they thought it was ‘heavily modified’ once upon a time. I do know it was crashed pretty bad, had some severe wheel rub on one side and it turned out the K frame was bent.

    I think I've been to the same garage couple years ago, he refused to work on parts of my car due to it being modified ?

    7 days later

    Mid-paint correction, all the cloudiness on the rear door panel has been removed and it is looking amazing ? Should be picking it up in the next couple of days.

    Does anyone know where I can find 10mm spacers in Aus? Ideally don’t want to buy OS and have to wait ages.

    • rado replied to this.

      Looking good!

      If you buy from FCP EURO good chance they come in a week.

      shadycourgette

      https://cdn.ozvolvo.org/uploads/5HNWIE63R7MH/1516702d-01dd-4e1f-aa46-5329d9ef7a39.jpeg

      Mid-paint correction, all the cloudiness on the rear door panel has been removed and it is looking amazing ? Should be picking it up in the next couple of days.

      Does anyone know where I can find 10mm spacers in Aus? Ideally don’t want to buy OS and have to wait ages.

      So I'm intrigued, called dumb lol . What is paint protection, ceramic coating ? What's involved ?

      I've just had mine ant the tt painted recently so wondering if I should get both cars treated..

      10mm spacers for the rears ?

      Hopefully bump into you at some point at a WAVE meeting ?

      Paint correction, pretty self explanatory. I don’t know the fine details but it would involve cutting and polishing to remove flat spots, imperfections etc. A ceramic coat protects the paint from the elements, stops it from deteriorating. It’s also heaps easier to clean, and with a black car I ain’t complaining!!

      Yeah for the rears, have you done yours? I’ve rolled the guards so may even be able to go 15 or 20 if I remove a bit of the plastic guard.

      Paul sent me some photos after he’d finished. He said it was pretty tricky as the respray was not the best but I think it’s come up pretty good.

      • rado replied to this.

        Ceramic polymer. It's even used in the drive through car wash I go to , dilute spray on but boy it shines after and bird poo , dirt etc washes off with a spray during the week following, if I was bothered I was going to buy a tub of the stuff from AliExpress.

        Diy and tons left much cheaper than the scam ones in auto shops ....

        shadycourgette

        Paint correction, pretty self explanatory. I don’t know the fine details but it would involve cutting and polishing to remove flat spots, imperfections etc. A ceramic coat protects the paint from the elements, stops it from deteriorating. It’s also heaps easier to clean, and with a black car I ain’t complaining!!

        Yeah for the rears, have you done yours? I’ve rolled the guards so may even be able to go 15 or 20 if I remove a bit of the plastic guard.

        Paul sent me some photos after he’d finished. He said it was pretty tricky as the respray was not the best but I think it’s come up pretty good.

        https://cdn.ozvolvo.org/uploads/6GE59YAK6C2D/b4d48192-3651-4455-889d-51dd4c2522ff.jpeg

        https://cdn.ozvolvo.org/uploads/KWTVORUMPKLX/66e1330a-4ffc-459a-9259-16f1bf52ec8f.jpeg

        https://cdn.ozvolvo.org/uploads/NKW7IGLLQV8C/047f03dc-44ab-4aee-a6c2-e8f6774fe124.jpeg

        I was running 12mm on the rears with volans , spare now if you'd like to try them . With longer bolts ?

          rado

          https://ozvolvo.org/discussion/comment/201652#Comment_201652

          I was running 12mm on the rears with volans , spare now if you'd like to try them . With longer bolts ?

          H&R 12mm? I saw those last night and thought they’d be perfect. If you don’t mind I’d love to see how they fit. Why aren’t you using them anymore?

          No they're not H&R

          I had them on when the Volans were on

          Now I'm running 28mm adaptors rear 21mm front for the bbs Jag wheels as the wheels are ET60 ?

            rado

            No they're not H&R

            https://cdn.ozvolvo.org/uploads/TOVP0DC4Q8CX/20220120-183345.jpg

            I had them on when the Volans were on

            Now I'm running 28mm adaptors rear 21mm front for the bbs Jag wheels as the wheels are ET60 ?

            Oh nice!

            I’ll flick you a message to tee up a time to come pick them up. Legend

            6 days later

            Test fitted 12mm spacers (cheers @rado), still a fair bit of room so will go 15mm and remove plastic guard if I need to.

            Still looking insanely good after the paint correction and ceramic coat last week.

            16 days later

            Not much happening at the moment, waiting on a bunch of parts from Berry Motor Group including some S70 roof rail trim so I can finally get rid of these terrible flaky ones.

            I am not enjoying playing music via the tape deck - is it sacrilege to install a double din? I know the plastic needs to be filed down, so point of no return… this Pioneer one doesn’t look half bad.

            I’m also trying to track down the elusive HT-259 parcel shelf speakers if anyone has a lead.

            Here’s a nice photo from classic cars & coffee last Sunday.

            I had that very H/U in my S70T5 auto, some JBL odd sized 2/3 way speakers in rear shelf with amp up back to power them the rear door units disabled as no point aiming at feet. It was a rock show cranked up.

            Get decent mid speakers to go in the shelf, splits, tweets on outer edge or good two ways, any old Volvo ones will need recommend or suspension replacement or voice coil repaired, unless it was Dynaudio set up there is no point....