Considering you would not be torque limited on the d5 motor with the 30-40 like you are with the fwd 6 speed setup... the d5 can be tuned for max power which is near enough 200kw+
Volvo detunned the heck out of it to keep it around 400nm max...
My personal vote is for the d5
Should be able to hit 7L/100 or better using it
That said... Considering the price of second hand BMW e60 530d... go test drive one before you commit to spending about the same...
Thats kinda my thought process
I've driven the V8 E60s, not too bad
No Julian I traded it to Berry a year ago. They engine swapped it and sold it. I live near Chaddy but have never seen it.
It just got all too hard because noone could get it to run right and in the end I had more than one opinion that it needed to be opened up and wasn't worth the cost.
Currently rocking a gen 5 Liberty, which I really like. Still have the V40 we bought from John and when he remembers my son brings it in for service.
Small development, my Brembos and 330mm disks fit the S90.
All that's needed is 25mm of spacers and some Tethys :D
Im liking this very much.
Rear pads are getting a bit low, might get some A1RMs for them.
This is relevant to my interests.
What are the calipers from? What rotors?
Falcon F6 calipers
S60R rotors
Yother adapters with spacer plates
And lots of manic laughter
I've got spacers!
GhettobirdSmall development, my Brembos and 330mm disks fit the S90.
All that's needed is 25mm of spacers and some Tethys :D
Im liking this very much.
Rear pads are getting a bit low, might get some A1RMs for them.
Rspec callipers on a Volvo, wow! Looks wicked
The only way the auto's survive is with the valve body being modified by MV automatics.
Cheers for the suggestion, Ill look into them now
Vee_QueThe only way the auto's survive is with the valve body being modified by MV automatics.
The 30-40 is much better than the 304 box because of the electronic line pressure control
Run full line pressure all the time and combine with accum enhancement (threaded rod) and nothing else than fresh steels and friction and fluid is required to hold 300kw long term
If you want a paddle shift controller... let me know and I can make another one up for you
If can even integrate into just about any aftermarket ECU with a variable analog voltage output for automatic mode
Thatd be really neat!
Could it work with the stock controller?
The SC-816 died suddenly one day, pooped in an SC-815 and got sick of the absolute garbage audio quality very quickly.
Pillaged the Alpine 178BT headunit from the 240 and picked up a set of JL series 3s in the 6.5 inch for the front, and a set of series 2s for the rear doors in 6.5 also.
Decided to see how factory I could make it look, ran new wiring through the factory grommets and sleeve for that stealth audio look.
Wondered how Id get the new wiring through, went with a method Id seen some of the commercial sparkies use - Cable lube!
Soldered both strands to the end of the old speaker wire, lubed it up with detergent and pulled it through!
Perfect fit, just needed to open up the door card a bit to clear the bigger woofer surround.
Dropped the tweeters straight into the hollowed out original units, Dremels help!
As much as I would have loved to keep the stock headunit, there was no way I was going to be able to get any kind of quality sound out of it.
Should have the rears in today
Rears are in, now to clean up the wiring
Tethys and Brembos are on!
A little poke, nothing a bit of camber wont help.
Very subtle, but they are there hiding behind the Tethys.
And a bit cleaner
Ive got a JL RD900/5 and a Kicker VL712 to go in, Then some work on building a manifold for the HX40 <3
JL are a great brand. Their 8" subwoofers are incredible, though so is the price tag.
Ive got a bick JL woofer box here ill never use,a 12 inch in it iirc
I love JL amps? Have a couple and a Kicker amp for sub , I collectedall this for the aborted v70r project.
Might get some info regarding the kicker sub and box :O
Wow, late to the party and saw this.
Julian, clearly you have a problem.
More Volvos is a GOOD problem!
?
GhettobirdMight get some info regarding the kicker sub and box :O
It's a JL about 600 wide/high ported with 10 or 12 inch JL sub....
Hidden away atm....
This was to power it, 250W bridged.
Ahh the old Rockford Fosgates, I remember those.
Also discovered the front driveshaft is spinning itself out of phase, the front half-shaft is a rubber dampened unit, over time the rubber comes free and the shaft spins semi-freely in the tube, a $330 re-tube job by GJ drivelines should fix that permanently and eliminate the low RPM driveline vibration ive been chasing for so long.
