T3rrorbyt3 blondejay;95066 wroteEcu in the engine bay. Lpg cars have taught me never do this. Or at least hide it in the air box. Ecu in the engine bay is not a problem at all have been doing it for years
T3rrorbyt3 Philia_Bear;95067 wroteWhat is the plans for the fuel filter? Looking at a few options at the moment but will post it up when it arrives
Vee_Que Join the inner gaurd to the chassis rail, that is a common failure point. Poor dog having to be a gaurd. Lonely life :(
Angus242164 ECU in the engine bay has been the norm for most makes for the last 15-20 years, many have it mounted directly to the intake manifold, VT-VY V8 Commodores have it only a few cm from the LH exhaust header with only a thin heat shield, and they never seem to fail.
Vee_Que Overkill on the plate just like mine, so you didn't answer and I am interested, the front shocks, are they staying seperate to the. Springs? If not, any reason or gain to go coil over style? Particularly given Andy whites targa class winning car uses seperate springs and shocks, and has bump steer issues as the roll centre on these things suck...
T3rrorbyt3 Philia_Bear;95165 wroteCould be lower Ha just a mockup photo will probably be a tad higher when it's up and running
deleted_user_160 T3rrorbyt3;95166 wrotePhilia_Bear;95165 wroteCould be lower Ha just a mockup photo will probably be a tad higher when it's up and running After all this effort,just body drop the thing!hahahahahhahaha
T3rrorbyt3 blondejay;95167 wroteT3rrorbyt3;95166 wrotePhilia_Bear;95165 wroteCould be lower Ha just a mockup photo will probably be a tad higher when it's up and running After all this effort,just body drop the thing!hahahahahhahaha It's a monocoque so body dropping it is impossible
Philia_Bear T3rrorbyt3;95168 wroteblondejay;95167 wroteT3rrorbyt3;95166 wrotePhilia_Bear;95165 wroteCould be lower Ha just a mockup photo will probably be a tad higher when it's up and running After all this effort,just body drop the thing!hahahahahhahaha It's a monocoque so body dropping it is impossible Nothing is impossible
T3rrorbyt3 Philia_Bear;95173 wrote T3rrorbyt3;95168 wroteblondejay;95167 wroteT3rrorbyt3;95166 wrotePhilia_Bear;95165 wroteCould be lower Ha just a mockup photo will probably be a tad higher when it's up and running After all this effort,just body drop the thing!hahahahahhahaha It's a monocoque so body dropping it is impossible Nothing is impossible That's true maybe a better choice of workds would have been too time consuming.
