I have used Android HU in the past as an alternative but there is no evidence that the existing Volvo OEM display will be transfered to the new HU from what I have read.
Replacement TFT has been purchased, just need to review a few more photos on some gear shifter mechs to see which is the better to purchase.
Security on them is poor at best
Rears were well over due
No more scrapping of metal on metal.
Gave the paint a once over and hit it with a sealer.
With the autonomous braking ( if you have it) and keep distance warning system it uses the rear brakes so you go through more rears than fronts! Keep the distance warning/braking to minimums and dont get up their arse you will keep the rears good , thats why Volvo brakes for rear are good , they last a bit longer....
Nelpd96Gave the paint a once over and hit it with a sealer.
https://cdn.ozvolvo.org/uploads/YOO96HZXFNLN/img-20220220-194004731-7e2.jpg
https://cdn.ozvolvo.org/uploads/Z7ETCDMXX87I/img-20220220-193554783-hdr.jpg
https://cdn.ozvolvo.org/uploads/TGH7QZW2PZ3M/img-20220220-193230634-hdr.jpg
Needs more black mirror covers and de chrome......You can buy new black chrome strips from VOLVO.
More progress. I still have to run two wires down to the obd port for fuel and gear position but otherwise all good.
Very nice!
Less nice is a CEL for the P0420 for the CAT but will deal with that later.
Nelpd96Less nice is a CEL for the P0420 for the CAT but will deal with that later.
Replace rear o2 with a resistor?
336mm brakes fitted up. XC90 caliper mounts are plug and play.
{"embed-external":{"data":{"url":"https:\/\/cdn.ozvolvo.org\/uploads\/U8EOW7XQIY6G\/img-20220304-132559720-hdr.jpg","name":"IMG_20220304_132559720_HDR.jpg","type":"image\/jpeg","size":3638547,"width":1920,"height":1440,"displaySize":"large","float":"none","mediaID":26088,"dateInserted":"2022-03-05T09:33:20+00:00","insertUserID":1763,"foreignType":"embed","foreignID":1763,"embedType":"file"},"loaderData":{"type":"file","file":[],"progressEventEmitter":{"listeners":[null]}}}}
Comparison between S60 left and XC90 right.
This lot is next.
VXDiag Nano turned up yesterday. VDash has been connected, first task to reset the SRI complete. Will do some more research over the next couple of days before trying to crack the CEM over the weekend to update for the dash.
The updated shifter came yesterday so will have a look at putting that in along with the suspension while VDash is doing it's thing.
So connected the VXdiag and fired up Vdash. 14days to crack the pin so might have to wait until I have a better internet connection connected and a Dice
Also got the fresh suspension in.
Anyone want some RD suspension?
The vxDiag will crack CEM in a few hours on average it seems.
I don't think a dice can do it.
