Stage 0 1998 V70XC

gavinhGav (@gavinh) Parmelia, Perth
in Modern 339 / 36joined Oct 2015
So the younger one of the old Volvo's is going to be getting a bit of needed TLC. The car has always had the servicing done when req'd and any issues have always been resolved. The car has done around the 260000km and still pulling strong as ever.
I've started ordering stuff, so far replacing all the ignition components, complete service, will be changing all the fluids, both inner and outer tie rods, looking at the bushings around the front end and front suspension mounts. Anything else?
Also has anyone been able to get the drive shift front cv on to the angle gear? In australia
«1345

Comments

  • Ex850RSnoopy (@Ex850R) Somewhere Over the Rainbow. Melbourne.
    9036 / 159joined Jul 2013
    @Rob is the angle gear and driveshaft ace, has the goods on cheap bearing etc.
    Spac -
    "High speed rail, Melbourne to Brisvegas!
    I retain a deep suspicion, but maybe these shitcunts will actually manage to do something not entirely shit?"
  • timbotim (@timbo)
    260 / 15joined Jun 2014
    The front c.v joint is available through the dealer. Approx $ 500 last time i got one
  • RobRob (@Rob) - Lockyer Valley, SE Qld
    5509 / 514joined Jul 2013
    They are available. I have accumulated a couple of spares. I would sell one cheaper than dealer price but is still pretty expensive.
    164fencesignature.jpg?m=1390588660

    Current: 1966 120 wagon, 1970 162, 1973 164E + supercharger, 1980 262C, 1998 C70 T5 AWD Coupe, 2009 XC70 D5 LE
    Previous: 1979 242GT, 1984 265GLE, 1985 740T, 1996 850R wagon, 1996 850AWD Manual among others
  • jamesincJames (@jamesinc) Sydney NSW
    6712 / 379joined Jul 2013
    Can't you just have the CVs remanned?
    Past: 1985 240GL, 1989 740 Turbo, 1992 240, 1984 240GL, 1980 244GL, 1996 850R wagon (olive pearl), 1985 360GLT
    Present: 1977 244DL, 1996 850R wagon (black), 245 Doomwagon
    Associated acts: '81 244 DL "Band-Aid", '81 244 GL Turbo "Billie"
  • gavinhGav (@gavinh) Parmelia, Perth
    edited May 23 339 / 36joined Oct 2015
    Rob (@Rob) wrote: »
    They are available. I have accumulated a couple of spares. I would sell one cheaper than dealer price but is still pretty expensive.

    Interested, how much and is it refurbished?
  • RobRob (@Rob) - Lockyer Valley, SE Qld
    5509 / 514joined Jul 2013
    Gav (@gavinh) wrote: »
    Rob (@Rob) wrote: »
    They are available. I have accumulated a couple of spares. I would sell one cheaper than dealer price but is still pretty expensive.

    Interested, how much and is it refurbished?

    I have a good second hand complete tailshaft or I have a brand new in box front CV joint.
  • gavinhGav (@gavinh) Parmelia, Perth
    339 / 36joined Oct 2015
    How much for the cv?, tailshaft will cost to much in freight
  • bigalbigal (@bigal) Tasmania
    1167 / 43joined May 2015
    Hi Gav, got any pics of the v70xc? I really like that particular model. Not many about.
  • gavinhGav (@gavinh) Parmelia, Perth
    339 / 36joined Oct 2015
    bigal (@bigal) wrote: »
    Hi Gav, got any pics of the v70xc? I really like that particular model. Not many about.
    Yeah I can find one
  • gavinhGav (@gavinh) Parmelia, Perth
    339 / 36joined Oct 2015
    Dqi3aYN.jpg
    TerryAEx850Rbigal
  • gavinhGav (@gavinh) Parmelia, Perth
    339 / 36joined Oct 2015
    That was 4 years ago, still looks that good too
  • bigalbigal (@bigal) Tasmania
    1167 / 43joined May 2015
    Nice! Good looking front on those.

    Now I need one.
  • gavinhGav (@gavinh) Parmelia, Perth
    339 / 36joined Oct 2015
    Yeah, just fitted ome wipers on the headlights, looks good with them too
  • gavinhGav (@gavinh) Parmelia, Perth
    339 / 36joined Oct 2015
    So got my goodies from fcp, swapped out all the leads, plugs, dizzy and rotor arm, cabin filter and air filter. It made a surprising difference also found #3 spark plug was not as tight as the rest and possibly causing a leak on the compression side of the stroke.
    Also message Ash@dvs to get pricing on bushings, mounts etc for the front end. Hopefully get the cv off Rob, just got to put some pennies away now.
    I think all up it will come to $2500ish by the time I'm finished and a v70 that will last a few more years

    2VMDkJo.jpg
    TerryAbigal
  • bigalbigal (@bigal) Tasmania
    1167 / 43joined May 2015
    Wipers on headlights is just showing off! Enjoying this thread. Pls get lots of pics.
  • bigalbigal (@bigal) Tasmania
    1167 / 43joined May 2015
    Do these v70xc's have the aw55 transmission?

    There's a manual in SA on gumtree at the moment. I'm guessing a manual version is extremely rare?
  • gavinhGav (@gavinh) Parmelia, Perth
    339 / 36joined Oct 2015
    bigal (@bigal) wrote: »
    Wipers on headlights is just showing off! Enjoying this thread. Pls get lots of pics.

    Will try to, am shite at that sort of stuff, and on a 2-1 roster in the Pilbara.
    Yeah mines an auto and it's now the main car ( just sold the Amarok) cause the missus preferred the Volvo to drive.

    Thanks for the complement.
  • gavinhGav (@gavinh) Parmelia, Perth
    edited June 14 339 / 36joined Oct 2015
    There's a manual in SA on gumtree at the moment. I'm guessing a manual version is extremely rare?

    Yeah for 1500 it's a steel
  • Ex850RSnoopy (@Ex850R) Somewhere Over the Rainbow. Melbourne.
    9036 / 159joined Jul 2013
    It's a P80 bigal so same auto as plebeian 850 or v70 unless it's a 1999 or 2000 then it's the 5spd
  • egadsegads (@egads) Yass NSW
    5343 / 156joined Jul 2013
    2000 got the 5 speed. 99 are still 4 speed.
Sign In or Register to comment.