Here's a few more pictures,
Stock (no modification at the point)
Below, DVS suspension setup, 25mm rear spacers
Below Current BNE setup,
And no the bike hasn't fallen off yet haha (even with spirited driving) Sea-sucker bike racks if you are wondering.
below is a few pictures from the suspension install (R 225/45 F205/50 from memory
Below is the rear control arms, modified to shorten wheelbase, also added reinforcement plates, you essentially weld the rear axle hole and re-drill 20mm forward you can see the original position highlighted blue, you also need to cut a section of the original arm away so it doesn't hit the rear axle when going through suspension travel (not final cut i made it look pretty don't worry) . see pics
Below is the stock position of the rear wheel, as you can see the centerline of the wheel does not sit in line with the center of the arch, so as you lower the car it rubs quite a lot on the rear portion of the guard, 20mm doesn't seam like much but its enough to prevent rubbing and get that desired ride height (for my taste at least). This info/mod is probably common knowledge, but just adding for the sake of my thread.
(before rear spacers where added)^
This what the wheels originally looked like they came off a Ferrari 308 so they where 5x108.
Front ET11 (10mm spacers)
Rear -2 (13mm spacers)
Rolled both guard
Thanks Tom