UPDATE
Hi all, i'm holding onto this car and still chasing a few parts. 1993 940 wagon. Located in Sydney.

  • AC condenser
  • Tail lights
  • Front bumper
  • Exhaust

Pm me and we can work out sat or Sunday

Plan to bring a slab or 2 of crown and feel like you won

"rear and centre muffler dents".... That's Hilarious. Sounds like you've gone to the wrong mechanic.

@Anthony his excuse was that i'm going to get all this checked at scrutineering for the rally. Its called the "shitbox" rally though so i can't imagine the scrutineering is that anal

I've never heard of dents in mufflers being relevant. Unless we are talking total distortion of the muffler, so long as it isn't leaking what's the issue? Some people who do inspections have mental health issues I'm sure. I have one place that always insists I degrease my engines despite them not being able to show the vehicle is leaking onto the ground, very frustrating.

15 days later
Cal

Still chasing drivers tail light and front bumper. @Philia_Bear sorted me out with everything else and more

Iv got a driver's side and passenger side tail light

    2 months later

    I'm now chasing an alternator and radiator and pretty much any useful spares for a 7000km round trip through some desert

    I have brand new radiators available. Behr brand. Have a couple of alternators but need those to keep all my red block cars running so really wouldn't want to sell.

    Check your coolant bottle isn't on its way out, and check your heater core hoses. Good to bring a length of 5/8 coolant hose, can use it to bypass heater core if need be.

    • Cal likes this.
    7 months later

    Couldn't sell the 940 so I've updated the thread, still chasing a few parts.
    Located in Sydney

    • AC condenser

    • Tail lights

    • Front bumper

    • Exhaust

      Cal

      Mark Iceton will have all or some of that.

      Try him at Berry Motor Group.

      • Cal likes this.

        i have a b230 - 750 engine downpipe with an o2 sensor welded in. unused since bung went in, thought it was a 240 one when taking to exhaust shop.

        I am driving to Wollongong tomorrow if that helps.

        $50, which is what the o2 sensor bung welding cost me.

        • Cal replied to this.
        • Cal likes this.
          13 days later

          dmc

          Hey mate thanks for your message. It's more the back half that I'm after than the headers. Cheers

            © 2013-2023 Oz Volvo. All rights reserved. | Forum Rules | Privacy Policy