Nelpd96

Less nice is a CEL for the P0420 for the CAT but will deal with that later.

I reckon my cat is stuffed up, stinks after giving it the berries but I've not had a CEL at all.

10 days later

336mm brakes fitted up. XC90 caliper mounts are plug and play.

{"embed-external":{"data":{"url":"https:\/\/cdn.ozvolvo.org\/uploads\/U8EOW7XQIY6G\/img-20220304-132559720-hdr.jpg","name":"IMG_20220304_132559720_HDR.jpg","type":"image\/jpeg","size":3638547,"width":1920,"height":1440,"displaySize":"large","float":"none","mediaID":26088,"dateInserted":"2022-03-05T09:33:20+00:00","insertUserID":1763,"foreignType":"embed","foreignID":1763,"embedType":"file"},"loaderData":{"type":"file","file":[],"progressEventEmitter":{"listeners":[null]}}}}

Comparison between S60 left and XC90 right.

VXDiag Nano turned up yesterday. VDash has been connected, first task to reset the SRI complete. Will do some more research over the next couple of days before trying to crack the CEM over the weekend to update for the dash.

The updated shifter came yesterday so will have a look at putting that in along with the suspension while VDash is doing it's thing.

So connected the VXdiag and fired up Vdash. 14days to crack the pin so might have to wait until I have a better internet connection connected and a Dice

Also got the fresh suspension in.

Anyone want some RD suspension?

The vxDiag will crack CEM in a few hours on average it seems.

I don't think a dice can do it.

Funny, the Vdash guys recommendation is Dice over VXdiag.

    Nelpd96

    Funny, the Vdash guys recommendation is Dice over VXdiag.

    Ahh, I'm thinking (or not!) . VDash I forgot, no brain, not enough sleep!

    I missed it, what discs and pads have you put in?

    You'll be pleased with the H&R springs for sure. Did you opt for Bilstein B8 or B6 for it?

    Got the kit with the B8 from FCP. It is firm but not too bad with the 18' rims.

      Nelpd96

      Got the kit with the B8 from FCP. It is firm but not too bad with the 18' rims.

      Going to 19" for a while then back to 18" with 245/40/18 Ps4s is a revelation! The old Dunlop 19" on Jaguar rims were so bad it sounded like a wheel bearing had gone, comfort was all jiggly and hard.

      This is on newish R-Design suspension, could do with a top of the range set of dampers on front for the propensity to push the nose.

      I'm sticking with Michelin from now on......

      Nelpd96

      Got the kit with the B8 from FCP. It is firm but not too bad with the 18' rims.

      The B8s are very good. We sell quite a lot of them. They're serviceable as well.