dmcwhat does the hoke in the booster look like? there are a couple in the workshop though i thought they were all the same. will check.
it's huge , the one way valve also sits hard up against the master, you would need to remove the master bottle to get it out which I thought was weird, I just chopped it out.
There's an adaptor grommet available that will mean you can then use the smaller type one way valve
I'm wrecking a few 164s...the valve looks larger in those, but hard to tell, and I couldn't easily pull it out...was afraid I'd break it. I can have another look and maybe pry gently with a screwdriver. I guess no harm in trying!
that would be good mate let me know how you go, if it was anything like mine it would be almost impossible to remove without removing the master bottle mine sat hard up against it
So as you can see the hole in the booster is larger than the diameter of the new, smaller one way valve. My brake guy gave me the correct size grommet, which means the new one way valve will fit into it.
If you like I can order one for you too
ramrodhttps://cdn.ozvolvo.org/uploads/940/LOITBOX6EEV4.jpg
So as you can see the hole in the booster is larger than the diameter of the new, smaller one way valve. My brake guy gave me the correct size grommet, which means the new one way valve will fit into it.
If you like I can order one for you too
yeah that would be great mate I would need postage to Dapto NSW 2530 just msg me when you know how much etc and I'll send you some cash
cheers mate
Ordered, arriving tomorrow
{"embed-external":{"data":{"url":"https:\/\/cdn.ozvolvo.org\/uploads\/941\/C1KAJDJNCSE4.jpg","name":"120035369_1270886699923140_871969210307120153_n.jpg","type":"image\/jpeg","size":38701,"width":720,"height":960,"mediaID":14870,"dateInserted":"2020-09-23T04:27:39+00:00","insertUserID":2359,"foreignType":"embed","foreignID":2359,"embedType":"file","format":null,"bodyRaw":null},"loaderData":{"type":"file","file":[],"progressEventEmitter":{"listeners":[null]}}}}
