Seats sold. Rear quarter panel sold. This is what the inside of the rear rail looks like! :)
1987 240 parts - sedan - nothing over $50 Daylesford Vic
Thanks Greg for letting me come take a chunk of Volvo home with me.
Greatly appreciated.
Rear section of wiring harness? Keen on the section from where it plugs into the main harness under the dashbroad through to the back if the car.
VolvoHordzRear section of wiring harness? Keen on the section from where it plugs into the main harness under the dashbroad through to the back if the car.
Yep, $25 plus postage (may fit in a large pre-paid bag which is about $20 as long as it’s under 5 kg. Lemme know if you want it. It’s intact as far as I know, but I did cut the wire for the dome lamp that runs up the A-pillar as I couldn’t be bothered to pull down the roof lining...
Sounds good to me. When you confirm postage cost pm me payment details. If it doesnt fit in a flat rate satchel use post code 2756 to work out the cost.
time8theuniverseThanks Greg for letting me come take a chunk of Volvo home with me.
Greatly appreciated.
No prob Tim. Good to meet you and I look forward to seeing how your GT comes out after the repairs!
VolvoHordzSounds good to me. When you confirm postage cost pm me payment details. If it doesnt fit in a flat rate satchel use post code 2756 to work out the cost.
Will be in touch via PM soon. Need to go sort out what wires you need and weigh/gauge the size. Chat soon.
17 days later
Seats, seatbelts and bonnet sold. Still have heaps of parts available. Message me with requests.
Front & rear springs sold pending payment. I now have a LOWVO!
Keen on the brake calipers and front wheel hubs if they're still available please?
LoudKeen on the brake calipers and front wheel hubs if they're still available please?
Sorry brake calipers already sold. I’m hesitant to sell the front hubs as I need to be able to roll it onto a trailer for scrapping eventually...a guy wanted the rear axle and was going to come and get the whole thing but I haven’t heard from him lately so that deal could fall through. Rear brake calipers are still there. If you were interested in coming to get the whole car let me know as I’m kinda at that stage now where I want the rest of it to go as a whole. PM me if interested in that.
Cheers guys. I'm in Perth so taking the "whole" car is out.
I do need a set of hubs. I'll put a call out locally and see if anything turns up. But if you decide to sell them let me know - plenty of scrappers collect cars with a crane from the verge here and the sale of the axle, hubs, struts etc might make up any shortfall.
@Roinik if you and @DCW242 have front calipers then I'm in the market for pairs. Let me know what you'd like by PM?
2 months later
Took this car to the scrap metal place today. Another one to be turned into Chinese toasters? Pulled the rear axle (already sold) and front struts and crossmember. PM me if you need anything as I still have quite a few bits and pieces including all panels except bonnet.
It's been awhile since I cut that section out to keep my project away from being a toaster and the cut doesn't look like it has rusted very much.
I coat the VW in weld through primer out of habit now everytime I touch it.
Probably a little late, but is the rear axle available from the second scrap car?
Greg i need a 240 cross member. We have done business before. E-go courier from your local depot. PM me
4 months later
Hi Greg,
Got a bit of a shopping list so I've sent you a PM.
Cheers,
Rylan
3 months later
Hello mate,
Post is a bit old but do you still have the master cylinder and the wiper motor? I'm in the market for both for my 1989 240. Let me know if you still have anything.
Cheers