• Wanted

  • Wanted: LH 2.4 flywheel and distributor

Wanted: LH 2.4 flywheel and distributor for b230ft.

Will be used in a 240.

Thanks
4 days later
If you're talking about a B230FT distributor (they are the same in a B230F), those engines came in 740 and 940s only and will not work on a B230 installed in a 240. Is your car automatic or manual?
@ramrod you can put a block dizzy in a B230FT, but you need to swap the aux shaft from a motor that has one, and then you just punch the blanking plate out of the block.
I like knowing exactly what parts people need before I assume anything. There was no mention of head mounted or block mounted distributor. But yes you are correct he will need a block mounted one in a 240
Can help with a block mounted dizzy, not with a flywheel unfortunately.

TTV have new fancy ones
Why have either distributor when you can have wasted spark instead - and be done with the whole mess of worn caps and rotor buttons forever.
bgpzfm142;c-156569 wroteWhy have either distributor when you can have wasted spark instead - and be done with the whole mess of worn caps and rotor buttons forever.
A good discussion for sure, but if anyone wants to follow it up please start a new thread.
Thanks guys,
I should have been more clear in my post. I will need a block mounted dizzy, I have already swapped the aux shaft. Car will be manual.
@Ghettobird I will send you a pm

Regarding flywheel I have contacted ttv. Will let you guys know how much it will be posted to OZ fyi.

Cheers,
Sent TTV an email start of the week.

"Thanks for the enquiry. This flywheel including shipping costs you £325. We don’t currently have stock but can manufacture one for you, lead-time would be 3-4 weeks."

215mm OE lite flywheel.
© 2013-2023 Oz Volvo. All rights reserved. | Forum Rules | Privacy Policy