pineapple
Looking for recommendations on a decent clutch for an '88 240 +t running 10-12psi, on lh2.2 don't know power output however did some digging and found about a year or so ago it ran a 14.1 1/4 with the clutch starting to slip, would hazard a guess and say it's the same clutch.
Cheers for the advice
ramrod
Standard because at that much power, you want the clutch to not be too strong. M47s get weak quick with boost
Vee_Que
Get rid of the dished flywheel and run a flat flywheel that wont lose its height as it wears, but the m47 will strip 3rd gear if you give it too hard a time.
iceton1975
Get Rid of the M47 they strip gears
pineapple
@iceton1975 that's what I was considering doing