Hi everyone,

This is probably covered in great detail on here but just quickly do wheels such as these from s60/v60 fit c30’s? I believe the wheel size is 19x8 for these but I’m thinking they won’t.

Might have an opportunity to score a set from someone at work and was just wondering.

Thanks

Thanks

Center bore is probobly to big and will likely rub
Thanks Philia Bear. I was thinking that would be the case but thought I’d ask just be certain. Shame, would have been a great buy and would have looked the part. Back to the search for a nice set of rims. Have had a few up against it but finding the C30 a little bit hard to find a nice design that goes really well with it that fits.
Boring the centre out can be done by some tyre dealers or engineer shop.
Centre bore rings eBay. IPD, FCP et al may have them.
If they are such a bargain, go and try one or at least look at the back of the wheel for the dimensions which are moulded in.
Ex850R;119823 wroteBoring the centre out can be done by some tyre dealers or engineer shop.
Centre bore rings eBay. IPD, FCP et al may have them.
Rings will fix the center bore issue
But the offset and rubbing will end up quite bad
S60 and c30 are quite a bit different in suspension setup
The P3 S60 centre bore is the same as the C30/S40/V50 and late V40. They will fit and no dramas with 235/35/19 tyres.

Regards,

Michael
Thanks everyone for your help. Think I’ll have to check them out and at least place one up against the car to see if they look good and compare them to one of the spare c30 wheels I have
© 2013-2023 Oz Volvo. All rights reserved. | Forum Rules | Privacy Policy