okay so before starting this post i made up the Db37 female side of the MS to go to the engine loom thought id share some pics of how i done it then tonight i wired the rest of it up to the ecm plug apart from the coolant sensor on which im running an aftermarket setup on it anyway, I plugged the setup into my plug on the car and with a sigh of relief and no odd smoke pouring from the sides i got a little flash from the led's on the front of the box which meaning it was ready to accept the tuning side of things but at this current time i dont have the pc connector which is currently on its way from Vic, it looks rough but from what it appears it works. I will put some pics up of the open jetronic case once i am done with further testing.
The Megasquirt assembled
The bundle of wires in which my loom started.
First few wires soldered on
All done
The end Job
Plugged into the MS and wired into Jetronic case will post more later of inside of the case