240 wagon rear bumper trims

Angus242164

Pair of rear corner bumper trims for 1981 and later 245's/240 wagons, stainless steel and plastic type. The plastic on the inner curve has come away from the metal on both, which can probably be fixed with a heat gun, and there is a crack in the inner plastic on the right one. These are the flatter type trims for wagons. $20 the pair, plus postage.

ramrod

Hi Angus, if you can find a centre trim, let us know

Angus242164

I have the centre trim, but I think it's too long for Aus Post.

It might actually make sense to throw some wheels and the trim onto a small pallet and send up using E-Go couriers...

Cam205

Sorry for being dull.

Are these the same as the ‘black trim’ later 240 wagons? Im not home to check what mine are but need the drivers side rear for a 92 with the black trims.

Cam

carnut222

Cam205
Sorry for being dull.
Are these the same as the ‘black trim’ later 240 wagons? Im not home to check what mine are but need the drivers side rear for a 92 with the black trims.
Cam

In a pinch you could use one of the SS ones that Angus has for sale and paint it black. However, the black ones are a SS piece with an over-moulded black plastic so none of the SS is exposed. We had an 88 240GL that I blacked out and I believe I either painted the SS bits or taped over them with vinyl black-out tape. It probably wouldn’t be too obvious to the casual observer but the profile would look a bit different as the rubber/painted SS/rubber has steps in it vs. the black ones being a smooth plastic contour.

Angus242164

These are the black plastic and stainless steel version, they came off an '87.

Angus242164

Bump