TerryA Afternoon all Just replaced the intermediate shaft from a 240 into a B230FT, that was the easy part. When I went to bolt up the front cover the shaft was locked solid. I used gasket cement as I had damaged the original gasket. Can anyone confirm if you need the gasket to provide clearance or have I installed something wrong. Thanks Terry
VolvoHordz Yeah you need the proper thickness gasket as it sets the in and out float of the intermediate shaft.
Philia_Bear VolvoHordz;125354 wroteYeah you need the proper thickness gasket as it sets the in and out float of the intermediate shaft. This +1