With uni done and dusted until August, trip preparations are in full swing!
Ordered a flame trap kit, injector seal kit, various fluids, odds and ends and a new blower motor.
Unfortunately my steering rack is now leaking out of one end, every few days the reservoir needs topping up :(
In other news, finally having got around to getting the bullbar on ( thanks to
@egads and
@Ex850R!) I've realised the mountings are different, here are some pictures:
Dummy fitment above, just resting on the bumper shocks
https://dl.dropboxusercontent.com/u/13133516/OzVolvo/13288154_10209662313175027_1376457664_o.jpg
The problem is different sized mounts! In this photo one the lower bolt (out of view) is through the bracket as its supposed to be, but you can see that the bullbars mounts are nearly twice the height, so the upper bolt is far from aligned! These brackets are usually attached to the bar itself, but i removed them in order to figure out alignment.
Any suggestions ? I'm thinking of flipping the bracket upside down and drilling new holes in to the bumper shocks