850/X70 Parts Wanted

Rob

Chasing some items for 2 ongoing projects

~~850 wagon rear bumper, preferably white.~~
~~850/V70 Rear Spoiler.~~
~~850 RH Headlamp.~~
~~RH tail light for a P80 V70 need upper and lower~~
~~850 grey leather front seats...... or a set of good seats to suit~~
A couple of sets of windscreen/ roof sill moldings from an 850 sedan.
~~850 turbo air filter box lid (must have turbo written on it)~~
~~Little locking clip for holding the battery in in a 850/x70~~
~~Complete headlight wiper setup for an 850.~~
~~headlight wiper arms and blades for an 850~~
~~16T, 18T, 19T, or 20T - don't need them all, tell me what you have?~~
~~Set of Titans (850 T-5R)~~

X70 clear headlamp lenses https://ozvolvo.org/discussion/2563/x70-clear-headlamp-lenses
X70 Hazard light switch (must have the retaining clips intact)
~~C70 rhf door latch mechanism~~
~~C70 Bonnet (must be perfect and silver)~~
C70 RHF Guard (must be perfect and silver)
~~C70 Bootlid (must be perfect and silver)~~
C70 LHF Door (must be perfect and silver)
C70 RHR tail light (must be perfect)
AWD downpipe (straight or angle flange)

I am sure more will come so the list will grow but that is a start.

Ex850R

See my gumtree ad post for s70t5 front seats!
0412970069 Rob is the guy , asked him about parts , head has gone , has turbo still.
Would like the dash top maybe.
He will sell whole or parts.

Philia_Bear

I have all of that sans bumper in my to get rid of pile
also heading your way in a few weeks

Rob

Talk to me Mike... :) how much?

and when will you be heading up. Can you also bring my Door and some other stuff?????

Rob

list updated, want a rear spoiler too.

Ex850R

One on Gumtree Rob , i shall look again.

Rob

some stuff found. list updated.

Ex850R

Has Mark any seats or do they all get thrown?

Rob

Not sure but Mark is too far away for such large items, spend more in freight than buying them in the first place.

Rob

list updated. @Philia_Bear, what do you have? keen if you are headed my way soon.

Philia_Bear

I have

RH tail light for a P80 V70 need upper and lower
850 grey leather front seats...... or a set of good seats to suit
Little locking clip for holding the battery in in a 850/x70
Complete headlight wiper setup for an 850.
16T, or 19T, - 16t is fresh pull, 19t is rebuilt (from a 13g iirc) have either flat or angeled housings and have flanges

Rob

Philia_Bear;46002 wroteI have

RH tail light for a P80 V70 need upper and lower
850 grey leather front seats...... or a set of good seats to suit
Little locking clip for holding the battery in in a 850/x70
Complete headlight wiper setup for an 850.
16T, or 19T, - 16t is fresh pull, 19t is rebuilt (from a 13g iirc) have either flat or angeled housings and have flanges

@Philia_Bear Do you have any pictures of the seats?

PM me some prices on everything and we shall do a deal.

AshDVS

Rob, I think I have a RH side windscreen mould if you still need one. Want me to take a look?

clinton

Rob wroteChasing some items for 2 ongoing projects
...
16T, 18T, 19T, or 20T - don't need them all, tell me what you have?

I have a 16T compressor housing and wheel from my C70. Some smaller turbos (13T?) can be upgraded that way - do you have a smaller turbo to play with?

Ideally you should get the new setup balanced, but it seems like a lot of people skip that step without too many troubles. I got mine balanced, and it cost $105 and they took what looks like a tiny amount of my compressor wheel.

If you have a use for it, you can have it.

Rob

That would be great Ash. I don't even mind if I get some with some damage in places, my intention is to cut and shut a couple of sets in order to remove the roof rails.

Rob

clinton;46306 wrote
Rob wroteChasing some items for 2 ongoing projects
...
16T, 18T, 19T, or 20T - don't need them all, tell me what you have?
I have a 16T compressor housing and wheel from my C70. Some smaller turbos (13T?) can be upgraded that way - do you have a smaller turbo to play with?

Ideally you should get the new setup balanced, but it seems like a lot of people skip that step without too many troubles. I got mine balanced, and it cost $105 and they took what looks like a tiny amount of my compressor wheel.

If you have a use for it, you can have it.

@clinton, sorry for not responding, you must have posted while I was typing my previous post and I never noticed. I am certainly keen to grab the 16T off you if it is still available. :)

I have a couple of smaller turbos here.

Rob

list updated

Philia_Bear

Everything got left in Sydney for stuff to sell u
Sorry

Rob

Philia_Bear;47157 wroteEverything got left in Sydney for stuff to sell u
Sorry

no worries.

still looking for stuff but.

AshDVS

No good with any roof or windscreen strips I'm afraid. :(