irishbastard
@aussiebastard‌ and I r currently wrecking a 740GLE and a 740TURBO, both sedans both silver, shoot me a pm for any enquiries or prices,
Cheers,
Darcy
volvodriverman
Got any good tan a pillar trims?
irishbastard
I've got quite a few tan spare bits I collected for my 740HP, I'll have a look tonight and I'll see if I've got any laying round, I'm pretty sure I've got some, I'm 99.99% sure I have, I'll just check to be certain, if you've got time you're welcome to give me a call after 6:00 pm tonight and I'll let you know if I have any in good nick then
0458510570
Regards,
Darcy
OldnDecrepit
Here's my list:
* tan rubber floor mats front and rear
* rear tail light garnish
* center brake light surround - tan
* rear spoiler
* headlight covers
* rear blinds (internal)
* sedan boot (trunk) mat
* electric radiator fan from a Volvo 940/960
Edit: Also needed are a set (preferably 5) of Draco wheels in good or better condition.
Vee_Que
I can help with the tail light panel, parcel shelf blinds, and what model headlight covers? 90?
irishbastard
OldnDecrepit;30371 wroteHere's my list:
* tan rubber floor mats front and rear might have some I'll have a look
* rear tail light garnish
* center brake light surround - tan
(I'm sure I've got one of them)
* rear spoiler
* headlight covers
* rear blinds (internal)
* sedan boot (trunk) mat
(Yep I've got them too)
* electric radiator fan from a Volvo 940/960
Edit: Also needed are a set (preferably 5) of Draco wheels in good or better condition.
I've definetally 100% got the dracos in good nick with resonable tyres
irishbastard
.
OldnDecrepit
Vee_Que - Inga is a 1990 model. I have already bought one rear shelf blind that was the wrong one so can you post a photo? Same for the rear panel. The headlights are like a early 960 one with the three bulbs in them.
Darc, I think the cost of freight from Vic to the Gold coast would be a killer for the Dracos.
Ex850R
Look up E-GO o&d , I don't know cost but I took a set of 17" rims to the depot to go north , it could not have been that expensive at all.
Their website let's you input sizes and weights , it will be cheap.
Vee_Que
It won't be as much as you'd think if you don't have tyres on them.. $100 or so.
Rear panel will need to be the 1990 rear one which I know of one actually...
irishbastard
Yeah, They do have tyres on them but I can easily have them taken off for cheaper shipping for the rims
woftam66
Hello Darc,
I recently joined this forum having bought a 740 Turbo for my son (and owning a 1980 244 GLE - with Golde Sunroof); 940 and 850 ... and need some bits for his 740 ... particularly the:-
Top air filter housing
A decent set of hoses (if in fact they exist) especially the turbo hoses.
Exhaust (one worth fitting)
Black glove box lid (although the one on there can be fixed easily enough)
Electric Radio Antenna.
Happy to make a trip down to Vic as we have family there and collect.
Thanks in advance for your response.
irishbastard
Yep, I've got all of those parts, I'm unsure about the turbo hoses, I'll check for u on Sunday night, ur welcome to call my number is above ^
woftam66
Thanks for the prompt reply.. will call next week once you've had a chance to check...Cheers
Vee_Que
Turbo hoses. Do not bother with old ones. They are just waiting to fail. Any pics of your cars Jack? Starting a seperate thread will work for it
irishbastard
woftam66;30475 wroteThanks for the prompt reply.. will call next week once you've had a chance to check...Cheers
No worries jack, I'll speak to u then, cheers,
Darcy
deleted_user_160
OldnDecrepit;30414 wrote
Darc, I think the cost of freight from Vic to the Gold coast would be a killer for the Dracos.
@OldnDecrepit‌ shipping from townsville to melbourne (door to door service) of 4x 17" steel wheels hubcaps and rubber. cost me all of $147
iceton1975
I can help with all of it and shipping of wheels will be approx. $90 for a set of 4
deleted_user_160
where were you when i needed you mark ;P my 17" steel are alot heavier. 24kg each with the 235/55 rubber. 15" with rubber would be close to 15kg?
calvintibia001
Is it a head mounted Dizzy ? I may want the Coil Wire, Spark Plug Wire and Dizzy if you are willing to let it go for cheap