martyG Seeking the correct torque settings for installation of a new engine transmission side mount on a 2004+ V40/S50. Its the big 17mm main bolt I am concerned about.Haynes "helpfully" advises contact local dealer.
johna I've got these from VIDA on my garage cupboard for my 2006 V50 2.4i. Might be of help? Is it one of the engine pads or maybe the torque rod?
martyG johna I've got these from VIDA on my garage cupboard for my 2006 V50 2.4i. Might be of help? Is it one of the engine pads or maybe the torque rod?https://cdn.ozvolvo.org/uploads/A00VDCC0090U/pxl-20230111-071919662.jpghttps://cdn.ozvolvo.org/uploads/MGCJYDLAMRQM/pxl-20230111-071929400.jpghttps://cdn.ozvolvo.org/uploads/VZ2DTBLDKCOE/pxl-20230111-071933389.jpgThank Johna, Very helpful. Using torque based only on the bolt size is always a concern to me as the safe torque also is a factor of the composition of the metal it is being put into along with the thread form
Philia_Bear martyG https://ozvolvo.org/discussion/comment/214147#Comment_214147Thank Johna, Very helpful. Using torque based only on the bolt size is always a concern to me as the safe torque also is a factor of the composition of the metal it is being put into along with the thread formIt's aluminium on pretty much every single bolt for engine and transmission on a p1 So my bet is that it's a m12 and 80nm sounds about right