Hey guys I’m making this post to basically see if I have/ am collecting the right bits to put my 244 back together and to let you guys know what I’m planning.
I should note I got this car as a roller that had been manual swapped and was running and driving so all of the clutch assembly apart from the trans are known to work. It was also running on a single Webber before me.
Im putting a 93 230fb motor with an h cam and converting it to block dizzy in with a single Webber carb. It’s going in front of an m46 which I’ll need to swap the rear housing for a mechanical tach box.
I’ll be getting the bung from yoshifab to block off the dizzy hole in the head and I’ve got no worries about converting it to block dizzy. The carb should be fine other than finding the correct fuel pump and fuel pressure reg.
With the trans I’m pretty sure I have everything but to be completely honest I haven’t touched a manual volvo box or opened up a manual before so I’m not too sure if I’ve got everything. I’ve got the clutch fork, throw out bearing and flywheel I’ll be getting the clutch soon. I’ve also got the m46 driveshaft.
If anyone has any input or advice I’d love to hear about it!
Thanks,
Nick