960 Rear bushes.

SPT940

I'm just filling my shopping cart at the Volvo Parts Webstore with bushes. Particularly the rear bushes.
There are quite a few. I know that the two upper rear bushes on the suspension subframe are shot. Generally the others seam fine.
Should I just replace the lot as it has to be removed and disassembled, or are there particular bushes that generally fare worse than others?

http://www.volvopartswebstore.com/showassembly.aspx?ukey_assembly=233708&ukey_make=865&ukey_model=11969&modelyear=1996&ukey_category=7868&ukey_driveline=499&ukey_trimlevel=11062

OldnDecrepit

I've only had to replace one pair of bushes on the front of my 960 but it only has 90ks on it.
My 740, however, had 200ks, so I replaced everyone I could but it wasn't cheap!
If you have to remove the major parts anyway, I would do the lot while you have it apart - assuming you're going to keep the car.

Vee_Que

Changing the upper front one that will be shot is the only one I would bother with. The upper arms are the same as the earlier irs and its the only one that wears other than the diff bush itself.

SPT940

I can actually see daylight through the upper rear bush!
I just feel like I should be doing all of them as it will be apart.
At the very lease the four bushes that support the subframe.

Vee_Que

They are a h shape though.

Vee_Que

Argh hourglass shape

SPT940

Nah I meant the rear were torn. The fronts are split as well. I think I'm just going to do the subframe rears. Everything else looks sound really. I've got enough to spend money on at the moment! It's a keeper so I can do the others next time.

Second or third time I've driven it in the wet and it so needs a LSD!!! Or better Tyres or both!