From my rally car.
They are 4x 46mm throttle bodies from a Suzuki Hayabusa, modified to suit a redblock. Includes intake manifold, s4T RX-7 550cc injectors, modified fuel rail and TPS.
Also have available Microtech MTX8 with individual coils and loom, S4 RX-7 CAS modified to suit redblock, 2x near new Bosch 044 or 041 fuel pumps, surge tank.
Basically ready to bolt in. $1600 for the lot, will separate by negotiation.
All located in Yass, southern NSW.
Isn't that a normal Friday night for you anyway Matty?
Pretty much.. Just different source material this time
If it would fit a 16v it would be perfect for me and my 122.
You can buy 8V manifolds onto 16V head adapters, right? If so, these should bolt on without drama.
Otherwise, you'd have to make up flange plates to join the head to the TBs. Possibly have to space the TBs to match the 16V port spacing, if they're different to 8V.
Probably won't fit in the 360 engine bay? Assuming your rally car was a 1xx/2xx...
They're not long. I'll get some measurements when I get home, but the most upstream part of the TB to the intake manifold gasket on the head would be something like 130mm, IIRC.
Plus air filter/box.
Tons of room in the 240 engine bay, with the overly long ram tubes I had on them.
Ok, let me know what they measure up at. Might be interested in it. What sort of power did it make in the 240?
90kW ATW, but that was WAY short of its potential. We were looking at 135+, ATW with the head it had on it, but a combination of the exhaust, the cam, and the 316,000km old stock B23 bottom end (and might tight arse) held it back...
Can we get some images up? Please
There's some photos in the TB showroom thread, "244 rally car". I'll dig them out if I can - anyone who is on a PC is welcome to best me to it...
130mm from head-intake manifold gasket face to the far end of the throttle bodies.
Thanks Rob. :)
Bad ass!!!!! I like special looking stuff like this.
Spac, I'm goin to open a thread to discuss this. I'm curious. Unless you already have one open. I would like I get into the yays, nays, do's and don'ts. And the whys. And finay the results.
I'm VERY interested. I can't believe I didn't see this before. When is a good time to ring you?
Any normal human time, although I'm busy from now until about 8;20.
Bugger. Unless you say otherwise, I'll try to remember to call you tomorrow.
I think that means he is free now, it being past 8.20.