• Wanted

  • 240 LH-2.4 wiring harnesses, firewall plates, ECU bracket, kick panel trim

Basically I want all the parts to put LH-2.4 in an older 240 and make it look factory. I don't need the computers themselves, but I do need the engine harness, the sub-harness that goes from the ECU over to the passenger firewall, I need the passenger-side firewall plate (the black metal bit), and I need the ECU bracket and the ECU kickpanel cover from the driver's footwell.

I know it's some effort to remove these parts, so happy to pay for the effort or if you're in Sydney happy to come and remove them myself if you have a parts car.
If the bracket, firewall panel and kick panel are the same as LH2.2 cars I might be able to help. Note that the shape of the firewall plates changed in '78 so you might need to modify your existing one as required.
@Angus242164 if I can separate the EZK bracket I can spot weld it to the existing panel. Pass-through for the loom isn't an issue, I have a hole saw the correct size for the LH-2.4 harness grommet.

I think the 2.2 bracket is different
I didn't realise the EZK bracket was attached to the firewall panel, that might be your best bet if you can weld or rivet the bracket to your existing panel.
I have the firewall plate, bracket and kick panel cover, do not have the harnesses.

Rob;c-162133 wroteI have the firewall plate, bracket and kick panel cover, do not have the harnesses.

@Rob I'll buy if you're selling, I can build the harness myself in a pinch.
I have a damaged engine harness too if that helps.

Might be able to provide some plugs and the like?


I have a harness, but it's from a LHD 240, so it doesn't put the ECU on a sub-harness, but that doesn't honestly phase me I'll just cut the ECU wiring off and add an extension sub-harness so I can relocate it to the driver's footwell. Currently I just have everything stuffed above the glove box, which sucks.
© 2013-2023 Oz Volvo. All rights reserved. | Forum Rules | Privacy Policy