robsta77
Looking for a place to have my 240 brake calipers rebuilt. Any suggestions would be great including rubber kits?
timbo
If you have access to an air compressor, I would take the pistons out yourself and see what condition the pistons and bores are in
robsta77
No really wanting to pull it apart without having seals ready. Happy to pay for the service. I’ll try the usual brake/clutch places around the area and see how I go. Was hoping someone might have gone through this and had someone to recommend in Vic south east area.
jamesinc
It's worth saying - it's relatively easy to rebuild them yourself, you just need some compressed air to pop the pistons out, and a small pick to get the seals out.
robsta77
Might have a crack if I can get my old compressor going again. Any suggestions on acquiring the seals? Any local suppliers that would still do these? I had a look at supercheap listing a rebuild kit at $44 a pop
jamesinc
I believe I sourced my rebuild kits from @AshDVS, that was a few years ago now back in 2013. I forget what they cost but they were inexpensive if memory serves (still going strong btw)
robsta77
Just placed an order for some bits from Ash. Totally didn’t cross my mind! Great, thanks for the help