240_bh
Hi guys
I was changing my fuel pump and had to strip electrical connectors (clip on ones) to put a different connection for new pump found out new pump doesn't work so just hoping someone has the old connectors or could point me in direction of where to buy some would be greatly appreciated .
Thanks Brett
jamesinc
In the past, I removed the connector shield and soldered a pigtail to the fuel pump and then added a standard 2-pin plug. After that first time, I've always bought the standard Bosch pumps that have screw terminals instead of the Volvo OE type, and crimped a ring terminal onto the wires.
You might have luck with Narva bullet connectors, however I think the Volvo ones are a slightly non-standard size, so you may find you have to squash the connector a bit to give a tight fit, which would also mean potentially poor contact.