so I have this problem, the car, 91 240 b230F.
it turns over, has spark, and plugs are always wet when I remove them, occasionally it will fire but not run, done a compression test, cylinder 1 is around 150psi, 2, 3 & 4 are around 175 psi, but that shouldnt stop it from running.
reset the timing belt as it was 2 teeth off on the dizzy pully.
checked the engine temp sensor that's reading 2, 2,354 kOhms on both cricurts,
all the injectors are firing.
What am I missing?
cheers
Gav