2019 Nationals in Bathurst are 8-10 November, just over three months away! Make sure to register at ozvolvo.org/nationals!

M47 Bellhousing

edited April 9 in Wanted
For a T5 conversion. In Wollongong. Will courier


  • Should be same as M46? That could widen your availability. If you don't need the LH2.4 notch then even earlier M45/M46 bellhousings should work...if you need the notch for crank sensor, then anything post-86 M46/M47 should be simple and will either have the notch or will have just a thin bit of aluminium that can be easily knocked out for it.
  • jamesincJames (@jamesinc) Oz Volvo Ice Fortress
    @Ravanelli I'm hoping to pull an M47 this weekend, I think I can part with the bellhousing, send me a PM if interested. I'm in Eastwood.
  • I've still got the one you were after with the questionable box. Still sitting in the boot of a 240 in Burwood, but it'll be in the Blue mountains soonish.
  • Anthony call me Jeff 0490540527
  • I have one I'm pretty sure, in Coffs Harbour
  • jamesincJames (@jamesinc) Oz Volvo Ice Fortress
    @Ravanelli my M47 is available now
  • iceton1975POM (MARK) (@iceton1975) Broadmeadows Victoria
    Got one sat in the workshop for parts at Berry Motor Group 03 98745544
Sign In or Register to comment.